Re: Redistributing OSPF into IGRP - Policy routing

From: Roddie Hasan (roddie@xxxxxxxxx)
Date: Sun May 20 2001 - 14:26:15 GMT-3


   
John - "The ip ospf network command only sets the timers. Go look it up."

Roman - "This command is not just about timers. Can some one back me up?"

Roman - "Are you saying that if you couldn't use frame maps on the spokes
and could use "ip ospf network statement we would still have a problem?"

John - "Your wrong. I'll let everyone else try and help you. I give up.
Good luck! LOL"

Now, I don't know if it was just a matter of John not reading carefully or
really understanding what Roman was saying (see third quote above) or
what. I'm not here to settle any arguments except to make sure that any
candidates don't walk away with inaccurate technical information about
OSPF - That is, the power of the "ip ospf network" command.

R14 - hub
R3 - spoke
R5 - spoke

Configs at the bottom..

R3#ping 1.1.1.5
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.5, timeout is 2 seconds:
!!!!!

Host entry in R3's routing table:
O 1.1.1.5/32 [110/128] via 1.1.1.14, 00:11:48, Serial1

R5#ping 1.1.1.3
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.3, timeout is 2 seconds:
!!!!!

Host entry in R5's routing table:
O 1.1.1.3/32 [110/128] via 1.1.1.14, 00:13:05, Serial1

All Routers
-----------
router ospf 1
 network 0.0.0.0 255.255.255.255 area 0

R14

---
interface Serial0.1 multipoint
 ip address 1.1.1.14 255.255.255.0
 ip ospf network point-to-multipoint
 ip ospf priority 200

R3 -- interface Serial1 ip address 1.1.1.3 255.255.255.0 encapsulation frame-relay ip ospf network point-to-multipoint

R5 -- interface Serial1 ip address 1.1.1.5 255.255.255.0 encapsulation frame-relay ip ospf network point-to-multipoint

And for those who bothered to read down this far ;-)

/home/roddie$ sh datescript * 2 days left until the lab! *

Regards, Roddie -- <>> Roddie Hasan CCNP, CCDP, SCSA, MCSE - Sprint E|Solutions <>> Technology Solutions Consultant - Dallas, Texas **Please read:http://www.groupstudy.com/list/posting.html



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:46 GMT-3