From: windchong0008 (windchong0008@xxxxxxxxxxx)
Date: Sun May 20 2001 - 06:19:13 GMT-3
Hi;
I was trying to working out an simple NBMA network scenario. It is a relati
ve simple environment, but I could not figure out why my 2 spoke can not establ
ish adjacency, able to ping every interface.
Hub Router cofiguration,
Router 1
interface serial 0.1 multipoint
ip address 172.16.1.3
frame-relay interface-dlci 102
frame-relay interface-dlci 103
router ospf 1
network 172.16.1.0 0.0.0.255 area 0
neighbor 172.16.1.1
neighbor 172.16.1.2
Router 2 (Spoke 1)
interface serial 0
ip address 172.16.1.1
encapsulation frame-relay
frame-map ip 172.16.1.3 201
frame-map ip 172.16.1.2 201
router ospf 1
network 172.16.1.0 0.0.0.255 area 0
neighbor 172.16.1.3 priority 10
neighbor 172.16.1.2
Router 3 (Spoke 2)
interface serial 0
ip address 172.16.1.2
encapsulation frame-relay
frame-map ip 172.16.1.3 301
frame-map ip 172.16.1.1 301
router ospf 1
network 172.16.1.0 0.0.0.255 area 0
neighbor 172.16.1.3 priority 10
neighbor 172.16.1.1
I do not know it's valid configuration for ospf or not.
Any advice welcome
TIA
Vincent Chong
==================================================================
7s.v'K6O9q$l+H=c http://sinamail.sina.com.hk
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:46 GMT-3