From: Darren Ward (dward@xxxxxxxxxx)
Date: Sat May 19 2001 - 08:35:42 GMT-3
Cliff,
I believe the following snippet should help:
username r5 callback-dialstring 5556789 password 0 cisco
!
int BRI0
ip address 10.1.35.6 255.255.255.252
no ip directed-broadcast
encapsulation ppp
dialer map ip 10.1.35.5 name r5 class CALLBACKR5 broadcast
dialer-group 1
isdn switch-type basic-net3
ppp callback accept
ppp authentication chap
!
map-class dialer CALLBACKR5
dialer callback-server username
!
Darren Ward
(Sydney 27-28/6)
Mohamed Heeba wrote:
> HI clif ;
> if u noticed my configs are actually from the dame link
> i have another question about the config posted
> this config will allow the server router to intialte calls to client which
> is not required to happen
> my question is if there is anyway to do this ?plus i wanted to know if the
> username command can be used to provide the dialer string with ISDN configs
>
> thx
>
> > -----Original Message-----
> > From: Clifton Stewart [SMTP:cliftonlstewart@home.com]
> > Sent: Saturday, May 19, 2001 3:27 AM
> > To: MAHeeba@itqan.co.ae
> > Cc: ccielab@groupstudy.com
> > Subject: callback
> >
> >
> > MaHeeba,
> >
> > Here is a good url.
> >
> > http://www.cisco.com/warp/public/793/access_dial/isdn-ppp-callback.html
> > <=== Watch the wordwrap
> >
> > -Cliff
> > >--- Original Message ---
> > >From: Mohamed Heeba <MAHeeba@itqan.co.ae>
> > >To: "'ccielab@groupstudy.com'" <ccielab@groupstudy.com>
> > >Date: 5/19/01 2:23:14 AM
> > >
> >
> > >guys ;
> > >notice this configuration provided for callback for ISDN
> > >this config will allow the server router to initiate calls to
> > the client
> > >,suppose this is not required
> > >ie only the server the router should call the client when the
> > client send a
> > >request .
> > >
> > >IS THERE ANYWAY TO DO THIS ? AND WHEN WE CAN USE THE USERNAME
> > >CALLBACK-DAILERSTRING ????
> > >
> > >thx in advance
> > >
> > >
> > >
> > >
> > >client router
> > >
> > >Username r2 pass cisco
> > >Int bri 0
> > >Ppp callback request
> > >Dialer map ip 10.1.1.1 name r2 broadcast 6733097
> > >ppp auth chap
> > >dialer-group 1
> > >!
> > >dialer-list 1 pro ip permit
> > >
> > >server router
> > >R2
> > >Usernmae r1 pass cisco
> > >Int bri 0
> > >Ppp callback accept
> > >Ppp callback-secure
> > >Dialer map ip 10.1.1.2 name r1 class dial1 broadcast 6714207
> > >ppp auth chap
> > >dialer-group 1
> > >!
> > >dialer-list 1 pro ip permit
> > >map-calss dialer dial1
> > >dialer callback-server username
> > >**Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:45 GMT-3