From: Ken Yeo (kenyeo@xxxxxxxxxxxxxxx)
Date: Fri May 18 2001 - 16:21:40 GMT-3
If you use ILMI, you do not need to specify NSAP address. You will only need
ESI address.
int atm 0
atm esi-address 000000000001.00
Everything else looks fine.
----- Original Message -----
From: "Mohamed Heeba" <MAHeeba@itqan.co.ae>
To: "'Kirk Reid'" <kirk.reid@vocto.com>; <ccielab@groupstudy.com>
Sent: Friday, May 18, 2001 11:14 AM
Subject: RE: ATM SVC's
> hi ;
> try the following configs and tell me if it do the purpose ....
> thx
>
> !CLIP Client router
> Inter atm 0
> atm nsap-address 47.00...0000011111
> IP address
> ATM PVC1 0 5 qsaal
> atm pvc 2 0 16 ilmi
> ATM arp-server nsap 47.00..000.22222
>
>
> !clip Server router
>
> Inter ATM 0
> ATM nsap-address 47.00000...0022222
> IP address 10.1.1.1
> atm pvc 1 0 5 qsaal
> atm pvc 2 0 16 ilmi
> ATM arp-server self
> !
>
> > -----Original Message-----
> > From: Kirk Reid [SMTP:kirk.reid@vocto.com]
> > Sent: Friday, May 18, 2001 8:10 AM
> > To: 'ccielab@groupstudy.com'
> > Subject: ATM SVC's
> >
> > I am looking for how to configure CLIP using SVC's instead of PVC's.
Any
> > hints or references? A sample config would be great.
> > **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:45 GMT-3