RE: ATM SVC's

From: Mohamed Heeba (MAHeeba@xxxxxxxxxxx)
Date: Fri May 18 2001 - 13:14:46 GMT-3

• Next message: Mohamed Heeba: "Traffic shapping question"
• Previous message: Jason Gardiner: "Re: point to point T1 troubleshooting."
• Maybe in reply to: Kirk Reid: "ATM SVC's"
• Next in thread: Rob Webber: "RE: ATM SVC's"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
hi ;
try the following configs and tell me if it do the purpose ....
thx

!CLIP Client router
Inter atm 0
atm nsap-address 47.00...0000011111
IP address
ATM PVC1 0 5 qsaal
atm pvc 2 0 16 ilmi
ATM arp-server nsap 47.00..000.22222

!clip Server router

Inter ATM 0
ATM nsap-address 47.00000...0022222
IP address 10.1.1.1
atm pvc 1 0 5 qsaal
atm pvc 2 0 16 ilmi
ATM arp-server self
!

> -----Original Message-----
> From: Kirk Reid [SMTP:kirk.reid@vocto.com]
> Sent: Friday, May 18, 2001 8:10 AM
> To: 'ccielab@groupstudy.com'
> Subject: ATM SVC's
>
> I am looking for how to configure CLIP using SVC's instead of PVC's. Any
> hints or references? A sample config would be great.
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html

• Next message: Mohamed Heeba: "Traffic shapping question"
• Previous message: Jason Gardiner: "Re: point to point T1 troubleshooting."
• Maybe in reply to: Kirk Reid: "ATM SVC's"
• Next in thread: Rob Webber: "RE: ATM SVC's"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:45 GMT-3