From: Justin Menga (Justin.Menga@xxxxxxxxxxxxxxxxxx)
Date: Thu May 17 2001 - 21:37:20 GMT-3
Hi Gene,
Your router itself can act as the terminal server via telnet - whether you
use this router to connect to the ISP or another router doesn't matter, as
long as the terminal server is reachable via IP from the Internet.
>From the telnet session, you can reverse telnet to each of your routers. To
really lock it down, you can use TACACS servers (e.g. Cisco Secure ACS
running on NT or Unix) and control based on user authentication what
commands each user can execute and their reverse-telnet capabilities.
Regards,
Justin Menga CCIE #6640 CCNP+Voice+ATM CCDP MCSE+I CCSE
Network and Security Consultant
Computerland New Zealand
PO Box 3631, Auckland
DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
mailto: justin.menga@computerland.co.nz
web: http://www.computerland.co.nz
CAUTION: This e-mail message and accompanying data may contain information
that is confidential and subject to privilege. If you are not the intended
recipient, you are notified that any use, dissemination, distribution or
copying of this message or data is prohibited. If you have received this
e-mail in error, please notify me immediately and delete all material
pertaining to this e-mail. Thank you.
-----Original Message-----
From: Gene Park [mailto:gpark_56@yahoo.com]
Sent: Friday, 18 May 2001 12:00 p.m.
To: ccielab@groupstudy.com
Subject: Internet Connection
I have seven routers to provide Internet
connection
by telnetting. Unfortunately, I am not familiar
with
this kind of thing.
Anyone have experience of connecting routers with
Terminal server to the Internet?
What system is necessary for the host? Unix, NT,
or
95 or 98? Or do I need ISDN router for this
connection?
Please let's share your knowledge on this.
Thank you.
Gunyang
=====
Gene Park
gpark_56@yahoo.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:44 GMT-3