From: Joseph Ezerski (jezerski@xxxxxxxxxxxx)
Date: Thu May 17 2001 - 12:32:09 GMT-3
My old employer had bought a few CSS11800s (When they were still
Arrowpoint). I remember the engineer saying that Arrowpoint used a
different pinout for the console port. I still have his number. I will
call him and ask him if there is a way to use it with a term-serv. I also
recall him saying that in future revisions, they had plans to switch to the
standard Cisco pinout. I will post what I find out.
**********************
Joseph Ezerski
Network Engineer
Broadcom Corporation
jezerski@broadcom.com
+1 (949)926-7037
**********************
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
andrew.2.shore@bt.com
Sent: Thursday, May 17, 2001 1:50 AM
To: ccielab@groupstudy.com
Subject: CISCO 11000
Guys,
Any idea how I can connect a Cisco 11000 content switch to a 2511 terminal
server.
The 11000 has a D type connector and comes with a D to D cable, I have tried
the D to RJ45 that comes with a normal router but no matter what cable (Roll
over, cross over straight) it does not work.
TIA
Andrew Shore
BTcd
IDC Technical Specialist
> ignite Content Hosting
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:43 GMT-3