From: Bob Dixon (bobdixon@xxxxxxxxxxxx)
Date: Wed May 16 2001 - 22:31:42 GMT-3
Hi,
I've never taken the lab before, but I've been told to be prepared for
anything. The Cisco site says that LANE is no longer covered. I do not
believe that the LS1010 is in the equipment list that is posted on the Cisco
site. I would check the Cisco site to verify what may or may not be covered.
People are not allowed to comment on the specific material covered on the
test. The best info you can get is from Cisco.
Cheers,
Bob
----- Original Message -----
From: Faraaz Kolsy <FKolsy@DIGITALNETWORKS.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, May 16, 2001 8:37 PM
Subject: atm
> does anyone know what we have to configure for atm, i was told just pvc
and
> svc on the routers only, not on the ls1010, can anyone verify, and also
> there is no lane, correct?? thanks
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:43 GMT-3