From: Pickell, Aaryn (Aaryn.Pickell@xxxxxxxxxxxxx)
Date: Wed May 16 2001 - 17:53:57 GMT-3
>From what I understand, when the explorer queue depth isn't configured,
there is no seperate queue for explorers, and they are just kept in the
regular interface input queue until they can be processed.
Aaryn Pickell - CCNP ATM, CCDP, MCSE
Senior Engineer - Routing Protocols
Getronics Inc.
Direct: 713-394-1609
Email:aaryn.pickell@getronics.com
This e-mail message and any attachments are confidential and may be
privileged. If you are not the intended recipient, please notify me
immediately by replying to this message and please destroy all copies of
this message and attachments. Thank you.
> -----Original Message-----
> From: ShahzaD Ali [mailto:shahzad-ali@home.com]
> Sent: Wednesday, May 16, 2001 2:48 PM
> To: ccielab@groupstudy.com
> Subject: RE: DLSw+ Explorer Queue question
>
>
> I got it.
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios11
> 2/112cg_cr/8rb
> ook/8rdlsw.htm#xtocid238677
>
> Default
> No default queue-max is configured for dlsw explorerq-depth
>
>
> Regards,
>
> ShahzaD
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> ShahzaD Ali
> Sent: Wednesday, May 16, 2001 2:37 PM
> To: Umer Khan; ccielab@groupstudy.com
> Subject: DLSw+ Explorer Queue question
>
>
> Hi there,
>
> What is the default value for DLSw+ Explorer Queue ?
>
> Thankx
>
>
> Regards,
>
> ShahzaD
> **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:42 GMT-3