From: Brian Dennis (brian@xxxxxx)
Date: Tue May 15 2001 - 02:50:20 GMT-3
Rob,
You can route frame dlci's over a GRE tunnel. You'll need Enterprise version
of software to do it. So create a tunnel on the routers and route the dlci's
inside the tunnel. Below is an example config. It should work but I'm typing
it out of memory so try it and if it doesn't work let me know. Also I've
personally never used a 1601 as a frame-switch but I've never heard you
couldn't.
Brian Dennis, CCIE #2210 (R&S)(ISP/Dial) CCSI #98640
5G Networks, Inc.
brian@5g.net
(925) 260-2724
***********************************************
hostname R1
frame-relay switching
interface Tunnel0
tunnel source Ethernet0
tunnel destination 10.1.1.2
interface Ethernet0
ip address 10.1.1.1 255.255.255.0
interface Serial0
encapsulation frame-relay
clockrate 64000
frame-relay intf-type dce
frame-relay route 16 interface Tunnel0 16
***********************************************
hostname R2
frame-relay switching
interface Tunnel0
tunnel source Ethernet0
tunnel destination 10.1.1.1
interface Ethernet0
ip address 10.1.1.2 255.255.255.0
interface Serial0
encapsulation frame-relay
clockrate 64000
frame-relay intf-type dce
frame-relay route 16 interface Tunnel0 16
***********************************************
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Rob Rummel
> Sent: Monday, May 14, 2001 9:30 PM
> To: ccielab@groupstudy.com
> Subject: Making a 4 port Frame Switch out of two 1601's
>
>
> I was wondering is it possible to make a Frameswitch with two 1601.
> Frameswitch meaning I could have Point to Multipoint.
> Each 1601 has two serial interfaces and 1 Ethernet Interface
> I was messing around with routmaps and Frame-relay route but nothing
> yet.
> Has anyone done this? Any suggestions
>
> Thanks....
>
> Any sufficiently advanced technology is indistinguishable from magic.
> - Arthur C. Clarke
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:41 GMT-3