From: Khalid Nafie (knafie@xxxxxxxxxx)
Date: Sun May 13 2001 - 16:22:07 GMT-3
hi guys,
there are funny things happning when i was trying to configure ISIS,
1st router took the configu, 2nd one accept the command router isis, but
under the ISIS config mode, there is no network command!!!!!!!!!! the 3rd
one do the same, the 4th one accept the router isis command but it doesnt
enter the isis configuration mode, for 2nd and 3rd routers when i tried to
enter again the isis configration mode a error message said
R5(config)#router isis
ISIS is already running; tag is ""
2nd router :
R5(config)#router isis
R5(config-router)#net
R5(config-router)#net?
% Unrecognized command
R5(config-router)#?
Router configuration commands:
default Set a command to its defaults
default-information Control distribution of default information
distance Define an administrative distance
distribute-list Filter networks in routing updates
exit Exit from routing protocol configuration mode
help Description of the interactive help system
maximum-paths Forward packets over multiple paths
no Negate a command or set its defaults
passive-interface Suppress routing updates on an interface
redistribute Redistribute information from another routing
protocol
summary-address Configure IP address summaries
traffic-share Algorithm for computing traffic share for alternate
routes
the router that did work has this ios 12.0(5),
te others have 12.0(9),12.0(9),12.0(5)T1 respectivly.
do any one had similar problems.
================================================
Yours,
Khaled Nafie
Network Engineer
Customer Services
MCSE,CCDP,CCNP VOICE ACCESS
NCR Corporation, Kuwait
Mob.: +965-9872046
Tel : +965- 2412201, 2412203
Fax : +965-2413075
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:40 GMT-3