RE: Old wound revisited- lab 8 ISDN keeps flapping

From: Ron Carithers (RCARITHERS@xxxxxxxxxxxx)
Date: Sat May 12 2001 - 14:42:08 GMT-3


   
I see the wrong network under ospf on r5:

router ospf 100

 network 137.20.244.5 0.0.0.0 area 0

-----Original Message-----
From: Dennis Laganiere [mailto:DennisL@advancedbionics.com]
Sent: Saturday, May 12, 2001 8:47 AM
To: 'ccielab@groupstudy.com'
Subject: RE: Old wound revisited- lab 8 ISDN keeps flapping

Isn't the solution to use snapshot routing?

--- Dennis

-----Original Message-----
From: Bernard Omrani [mailto:one@dollarpower.com]
Sent: Saturday, May 12, 2001 7:23 AM
To: 'ccielab@groupstudy.com'
Subject: Old wound revisited- lab 8 ISDN keeps flapping

I am yet to manage to keep this line quiet.
I would like to hear from the people who are currently working on lab 8 and
have managed to control this link.

I know that igrp redistribution could be the culprit. As a last resort, I
have removed igrp from r5 totally and shut down int s0.2.
I know BGP connection from r1-r6 could be the culprit. There was a
recommendation in the archives to lengthen the keepalive and hold periods
using BGP neighbor timers command. Although I do not see this as
ccbootcamp's solution, I lengthened this timer to 300 and 600. The chat
keeps on going & going.

Thanks,
Bernard

hostname r5

interface Loopback0
 ip address 137.20.240.1 255.255.240.0
 no ip directed-broadcast
!
interface BRI0/0
 ip address 137.20.224.5 255.255.240.0
 no ip directed-broadcast
 encapsulation ppp
 dialer idle-timeout 60
 dialer map ip 137.20.224.6 name r6 broadcast
 dialer-group 1
 isdn switch-type basic-ni
 isdn spid1 0835866101
 isdn spid2 0835866301
 no cdp enable
 ppp authentication chap
!
interface BRI0/1
 no ip address
 no ip directed-broadcast
 shutdown
 isdn switch-type basic-ni
!
interface BRI0/2
 no ip address
 no ip directed-broadcast
 shutdown
 isdn switch-type basic-ni
!
interface BRI0/3
 no ip address
 no ip directed-broadcast
 shutdown
 isdn switch-type basic-ni
!
interface Ethernet1/0
 ip address 137.20.64.5 255.255.240.0
 no ip directed-broadcast
!
interface Serial1/0
 no ip address
 no ip directed-broadcast
 encapsulation frame-relay
 no ip mroute-cache
 no frame-relay inverse-arp
 frame-relay lmi-type ansi
!
interface Serial1/0.1 multipoint
 ip address 137.20.100.34 255.255.255.224
 no ip directed-broadcast
 frame-relay map ip 137.20.100.33 501 broadcast
 frame-relay map ip 137.20.100.35 503 broadcast
!
interface Serial1/0.2 point-to-point
 ip address 137.20.200.17 255.255.255.240
 no ip directed-broadcast
 frame-relay interface-dlci 504
!
interface TokenRing1/0
 no ip address
 no ip directed-broadcast
 shutdown
 ring-speed 16
!
interface Serial1/1
 ip address 137.20.25.2 255.255.255.0
 no ip directed-broadcast
!
router ospf 100
 area 1 virtual-link 200.200.100.1
 area 1 virtual-link 137.20.33.33
 redistribute igrp 100 metric 100 metric-type 1 subnets route-map
filter_igrp
 network 137.20.25.2 0.0.0.0 area 2
 network 137.20.64.5 0.0.0.0 area 0
 network 137.20.100.34 0.0.0.0 area 1
 network 137.20.240.1 0.0.0.0 area 0
 network 137.20.244.5 0.0.0.0 area 0
!
router igrp 100
 redistribute ospf 100
 passive-interface BRI0/0
 passive-interface Ethernet1/0
 passive-interface Serial1/0.1
 passive-interface Serial1/1
 network 137.20.0.0
 default-metric 1000 100 255 1 1500
!
ip classless
!
access-list 1 permit 137.20.100.32 0.0.0.31
access-list 1 permit 137.20.240.0 0.0.0.255
access-list 1 permit 137.20.64.0 0.0.0.255
access-list 1 permit 137.20.224.0 0.0.0.255
access-list 1 permit 137.20.25.0 0.0.0.255
access-list 2 permit any
dialer-list 1 protocol ip permit
route-map filter-igrp deny 10
 match ip address 1
!
route-map filter-igrp permit 20
 match ip address 2
!

hostname r6
interface Loopback0
 ip address 137.20.60.1 255.255.240.0
!
interface FastEthernet0/0
 ip address 137.20.64.6 255.255.240.0
 no ip redirects
 duplex auto
 speed auto
!
interface Serial0/0
 ip address 137.20.86.2 255.255.255.0
!
interface BRI0/0
 ip address 137.20.224.6 255.255.240.0
 encapsulation ppp
 ip ospf demand-circuit
 dialer idle-timeout 60
 dialer map ip 137.20.224.5 name r5 broadcast 8358661
 dialer-group 1
 isdn switch-type basic-ni
 isdn spid1 0835866201
 isdn spid2 0835866401
 no cdp enable
 ppp authentication chap
!
interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
router ospf 100
 log-adjacency-changes
 redistribute connected metric 200 subnets route-map allow_conn_s0
 redistribute bgp 2 metric 100 subnets
 network 137.20.60.1 0.0.0.0 area 0
 network 137.20.64.6 0.0.0.0 area 0
 network 137.20.224.6 0.0.0.0 area 0
!
router bgp 2
 bgp log-neighbor-changes
 network 137.20.86.0 mask 255.255.255.0
 redistribute ospf 100 metric 100 route-map osfp1bgponr6_ctrl
 neighbor 137.20.25.1 remote-as 2
 neighbor 137.20.25.1 update-source Loopback0
 neighbor 137.20.25.1 timers 300 600
 neighbor 137.20.86.1 remote-as 1
 neighbor 137.20.86.1 timers 300 600
 neighbor 137.20.86.1 default-originate
 no auto-summary
!
ip classless
ip http server
!
access-list 1 permit 137.20.86.0 0.0.0.255
access-list 6 permit 172.168.70.0 0.0.0.255
access-list 6 permit 137.20.10.0 0.0.0.255
access-list 6 permit 160.0.0.0 0.255.255.255
access-list 65 permit 137.20.224.0 0.0.0.255
dialer-list 1 protocol ip permit
route-map allow_conn_s0 permit 10
 match ip address 1
!
route-map osfp1bgponr6_ctrl deny 5
 match ip address 65
!
route-map osfp1bgponr6_ctrl permit 10
 match route-type internal
!
route-map osfp1bgponr6_ctrl deny 20
!
route-map osfp1bgponr6_ctrl permit 30
 match route-type external

r6#sh dialer

BRI0/0 - dialer type = ISDN

Dial String Successes Failures Last DNIS Last status
8358661 12460 37 00:00:00 successful
0 incoming call(s) have been screened.
0 incoming call(s) rejected for callback.

BRI0/0:1 - dialer type = ISDN
Idle timer (60 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is data link layer up
Dial reason: ip (s=137.20.224.6, d=224.0.0.5)
Time until disconnect 59 secs
Connected to 8358661 (r5)

BRI0/0:2 - dialer type = ISDN
Idle timer (60 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is idle
r6#
!
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:40 GMT-3