From: Dirar Hakeem (dirarhakeem@xxxxxxxxx)
Date: Sat May 12 2001 - 00:57:52 GMT-3
Do you have "area 0 authenticaion" on the router
that's NOT connected to area 0??
I struggeled with the same problem a while back, and
that was the problem (I didn't have that command); not
sure if you have the same problem.
--- Ccieyet2b@aol.com wrote:
> Hi all,
>
> I've tried a number of different ways to get routes
> seen in an area connected
> to area 0 via a virtual link, but if I have
> authentication on area 0, nothing
> I've tried so far works. (All subnets are visable
> when area 0 doesn't have
> authentication).
>
> Here are some of the things that don't work:
>
> Configuring authentication on the transit area
> with the same passwords as
> used in area 0.
> Configuring authentication on the virtual link
> itself (both ends), area x
> virtual x.x.x.x authen-key password
> Configuring both of the above at the same time.
>
> If you know how to make this work, could you show me
> the actual config?
> thanks a whole bunch.
>
> Jim
> **Please
> read:http://www.groupstudy.com/list/posting.html
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:40 GMT-3