From: andrew.2.shore@xxxxxx
Date: Fri May 11 2001 - 12:49:01 GMT-3
yes, stick a pin in the little hole next to the console port, this turns it
into the same type of port you'll find on a router.
Or get a TP-TP connector and use a roll over cable to roll the octopus cable
back to straight.
Andrew Shore
BTcd
IDC Technical Specialist
> ignite Content Hosting
-----Original Message-----
From: Brian [mailto:signal@shreve.net]
Sent: 11 May 2001 16:26
To: Mike Hennigan
Cc: ccielab
Subject: Re: Cat5k and octpus cable
On Wed, 25 Apr 2001, Mike Hennigan wrote:
> is there anyway to make the cat 5k w/a sup III use the console cable
> from an octupus calbe connected to a 2511? **Please
> read:http://www.groupstudy.com/list/posting.html
Yes! I would like to know the answer to this as well. I have a SupIII on
a 5002 that I would like to connect to my 2511..........not sure whats
needed though.
Brian
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:39 GMT-3