From: Bob Chahal (bob.chahal@xxxxxxxxxxxx)
Date: Wed May 09 2001 - 10:47:00 GMT-3
In the bootcamp provided solution the loopback doesn't show up on r6 but if
you needed a solution I guess you could.........
Configure the serial interfaces with a secondary ip address from the
classful network 15.0.0.0 e.g 15.15.68.x/24
The route will then show up.
It's a fix.
Bob
----- Original Message -----
From: "Joe Shmoe" <herro91@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, May 08, 2001 10:11 PM
Subject: CCBootcamp Lab 17 question
> Hi All,
>
> In Lab 17, R8 and R6 are running IGRP. I've tried to
> get the loopback0 interface on R8 to show up on R6 via
> IGRP and can't get it to work.
>
> Anyone else had this problem? It might be an IGRP
> issue, but I can't tell.
>
>
> Thanks,
>
> Joe.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:36 GMT-3