From: Jaeheon Yoo (kghost@xxxxxxxxxxxx)
Date: Wed May 09 2001 - 03:21:19 GMT-3
Hi, Chun-Yu
Thanks for your reply.
I'd like to add some of details.
1. "clns routing" is automatically enabled when you enable "router isis".
So you have to do it explicitly as you said.
2. Level2 router won't automatically inject a default route itself to level1
router.
It just mark its ability to route across other areas with ATT bit.
3. But it doesn't always mark that ability,
It does only if it has a L2 adjacency with another L2 router.
Those are what I have to realize by now.
Correct me if I'm wrong.
Regards,
Jaeheon
----- Original Message -----
From: "Chun-Yu Chen" <chunyuchen@kimo.com.tw>
To: "Jaeheon Yoo" <kghost@chollian.net>; "ccielab" <ccielab@groupstudy.com>
Sent: Wednesday, May 09, 2001 12:02 PM
Subject: Re: How to inject a default route into ISIS level-1?
>
> Hello,
>
>
> You must enable "clns routing" in the global and type the "clns router
isis
> 1" in the interface between the level1 and level 2.
> Then level2 router will auto inject the default route to level 1 router.
> you don't nees use "redistribution" command
>
> Jerry
>
> ----- Original Message -----
> From: "Jaeheon Yoo" <kghost@chollian.net>
> To: "ccielab" <ccielab@groupstudy.com>
> Sent: Tuesday, May 08, 2001 1:05 PM
> Subject: How to inject a default route into ISIS level-1?
>
>
> > Hi, all
> > I have two isis routers A,B.
> > A is a level-1 router and B is a level-1-2 router. They are connected
via
> a
> > serial connection
> > B is also connected to another router which is not running ISIS.
> > So, B's level 1 LSP is not marked with ATT bit set.
> > Therefore, even if both A and B is enabled with "clns router isis", it
> > doesn't do what I want.
> > And "default-information originate" won't be redistributed into level-1.
> >
> > How can I inject a default route into ISIS level-1 only router?
> >
> > Thanks in advance.
> >
> > Regards,
> > Jaeheon
> > **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:36 GMT-3