From: Rena A. hu (huaq@xxxxxxxxxxx)
Date: Wed May 09 2001 - 00:34:36 GMT-3
Hi All, I run into the following scenario which I couldn't totally
understand. SR/TLB has been enabled on R1. Ethernet interface MAC address
is 0000.0c47.8146. Why is the non-connonical address showed as
4000.30e2.8162 other than 0000.30e2.8162 when using command sh source?
Does it mean that 40 always need to be used to convert 00 at the
first octet when transferring connocial to non-cannonical address from
Ethernet to Token Ring? r1#sh sourRing Group 200:
No TCP peername set, TCP transport disabled
Maximum output TCP queue length, per peer: 100
Rings:
bn: 1 rn: 100 locvrt ma: 4000.0000.0009 Virtual-TokenRing0 fwd: 0
bn: 1 rn: 300 locvrt ma: 4000.0000.000a Virtual-TokenRing1 fwd: 0
bn: 1 rn: 70 locvrt ma: 4000.30e2.8162 Bridge-group 10 fwd:
0 Thanks for your help,Rena Router cfg:source-bridge ring 200source-bridge
transparent 200 70 1 10int e0bridge 10exitint to0ring 16source 100 1 200exitint
to1ring 16source 300 1 200exitbridge 1 pro ieee
------------------------------------------------------------------------
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:36 GMT-3