From: Paul Crist (pcrist@xxxxxxxxxxx)
Date: Tue May 08 2001 - 17:44:43 GMT-3
Originally I was working with just the area ranges, the summary address got
into the config when I was trying anything to get it to work. Here is the
router ospf from the abr and the sho ip route, as you can see I don't get a
summary for the 170.10.1.0 network.
router ospf 200
area 0 range 170.10.1.0 255.255.255.0
area 2 virtual-link 170.10.4.4
network 170.10.1.18 0.0.0.0 area 0
network 170.10.1.35 0.0.0.0 area 0
network 170.10.2.5 0.0.0.0 area 2
network 170.10.3.5 0.0.0.0 area 2
170.10.0.0/16 is variably subnetted, 12 subnets, 4 masks
O E2 170.10.32.0/24 [110/158350] via 170.10.2.4, 00:06:02, Ethernet0
O E2 170.10.33.0/24 [110/20] via 170.10.2.4, 00:06:02, Ethernet0
C 170.10.1.32/28 is directly connected, Serial0.103
O IA 170.10.4.4/32 [110/11] via 170.10.2.4, 00:06:02, Ethernet0
O 170.10.1.0/28 [110/128] via 170.10.1.17, 00:06:02, Serial0.102
[110/128] via 170.10.1.33, 00:06:02, Serial0.103
O IA 170.10.2.0/24 [110/20] via 170.10.2.4, 00:06:02, Ethernet0
C 170.10.2.0/26 is directly connected, Ethernet0
C 170.10.3.0/24 is directly connected, Loopback0
O E2 170.10.4.0/24 [110/158350] via 170.10.2.4, 00:06:02, Ethernet0
O E2 170.10.16.0/24 [110/158350] via 170.10.2.4, 00:06:03, Ethernet0
O E2 170.10.17.0/24 [110/158350] via 170.10.2.4, 00:06:03, Ethernet0
C 170.10.1.16/28 is directly connected, Serial0.102
----- Original Message -----
From: "Johnny Dedon" <johnny.dedon@exodus.net>
To: "Paul Crist" <pcrist@netsync.net>
Sent: Tuesday, May 08, 2001 4:26 PM
Subject: Re: FatKid 501
> Paul,
> I haven't looked at this lab, but I think you problem is related to one of
> two things. First, the summary address command is used to summarize
> external routes being redistributed into ospf. Second, the area range
> command summarizes routes to be advertised to other ospf areas. You should
> look to summarize the route before it gets to area 0 where it looks like
> your redistribution is occurring. Can you summarize it in Area2 using the
> area-range command? If so the summary will show up in area 0 where you
can
> redistribute into igrp.
>
> HTH
> Johnny Dedon
> Senior Staff Consultant
> Exodus Professional Services
> johnny.dedon@exodus.net
> www.exodus.net
> ----- Original Message -----
> From: "Paul Crist" <pcrist@netsync.net>
> To: <ccielab@groupstudy.com>
> Sent: Tuesday, May 08, 2001 3:04 PM
> Subject: FatKid 501
>
>
> > I am doing the fatkid 501 lab and I can't get a network to summarize and
> > redistribute into IGRP. Instead of using multipoint on the frame relay
> > network I used point to point sub interfaces. When I attempt to do an
> summary
> > address at the redistribution router it does not work. My IP address
from
> the
> > frame relay are all subnets of the same class C address which I am
trying
> to
> > do a summary address for. Here is the router ospf and igrp from the
> > redistribution router. The 170.10.1.0 network is the problem child.
> >
> > router ospf 200
> > area 0 range 170.10.1.0 255.255.255.0
> > area 2 range 170.10.2.0 255.255.255.0
> > area 2 virtual-link 170.10.3.5
> > summary-address 170.10.1.0 255.255.255.0
> > summary-address 170.10.2.0 255.255.255.0
> > redistribute rip subnets
> > redistribute igrp 200 subnets
> > network 170.10.2.4 0.0.0.0 area 2
> > network 170.10.4.4 0.0.0.0 area 3
> >
> > router igrp 200
> > redistribute ospf 200
> > redistribute rip metric 1 255 1 1 1
> > passive-interface Ethernet0
> > passive-interface Loopback0
> > passive-interface Serial1
> > passive-interface TokenRing0
> > network 170.10.0.0
> >
> > Show ip route from the redistribution router:
> > Gateway of last resort is not set
> >
> > 170.10.0.0/16 is variably subnetted, 11 subnets, 4 masks
> > C 170.10.32.0/24 is directly connected, TokenRing0
> > R 170.10.33.0/24 [120/1] via 170.10.32.3, 00:00:10, TokenRing0
> > O 170.10.1.32/28 [110/74] via 170.10.2.5, 01:06:40, Ethernet0
> > O 170.10.1.0/28 [110/138] via 170.10.2.5, 01:06:40, Ethernet0
> > O 170.10.2.0/24 is a summary, 01:06:34, Null0
> > C 170.10.2.0/26 is directly connected, Ethernet0
> > O IA 170.10.3.0/24 [110/11] via 170.10.2.5, 01:06:40, Ethernet0
> > C 170.10.4.0/24 is directly connected, Loopback0
> > O 170.10.3.5/32 [110/11] via 170.10.2.5, 01:06:40, Ethernet0
> > C 170.10.16.0/24 is directly connected, Serial0
> > O 170.10.1.16/28 [110/74] via 170.10.2.5, 01:06:40, Ethernet0
> > C 192.19.15.0/24 is directly connected, Serial1
> >
> > Sho ip route from the router in IGRP
> >
> > 170.10.0.0/24 is subnetted, 4 subnets
> > I 170.10.32.0 [100/158313] via 170.10.16.4, 00:00:21, Serial4
> > I 170.10.33.0 [100/10002255] via 170.10.16.4, 00:00:21, Serial4
> > I 170.10.4.0 [100/158750] via 170.10.16.4, 00:00:21, Serial4
> > C 170.10.16.0 is directly connected, Serial4
> > **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:36 GMT-3