From: John Kaberna (jkaberna@xxxxxxxxxxxx)
Date: Mon May 07 2001 - 20:01:36 GMT-3
Normally I would say that you should bitswap them if they are on Ethernet
and don't if on Token-Ring. However, I would clarify such a question with
the proctor on the real lab as they may want you to use that exact MAC
address assuming that in the instructions it has already been bit swapped.
Hope that helps.
John Kaberna
CCIE #7146
NETCG Inc
www.netcginc.com
(415) 750-3800
Fax: 750-3900
----- Original Message -----
From: "Russell Lusignan" <rlusignan@birdonawire.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, May 06, 2001 11:26 PM
Subject: CCBootcamp Lab 19
> Quick question about lab 19, in the DLSW section, you have to enter a
couple
> of static MAC entries, from what I understand about DLSW, don't those MAC
> addresses need to be bit swapped before they can be entered into the
> configuration? The final configs don't do it. Anyhow have any ideas?
>
> -Russ
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:36 GMT-3