From: robert lowery (bob@xxxxxxxxxxxxxx)
Date: Mon May 07 2001 - 17:21:27 GMT-3
also take the ecp class at mentor..the last day is trouble shooting..
val is the best...bob
x.mentor
At 03:45 PM 5/7/2001 -0400, Mark Stover wrote:
>If you're really worried about troubleshooting or don't have much
>experience with it, I would suggest taking the Cisco Internetwork
>Troubleshooting (CIT) class at Mentor Technologies. They have enhanced the
>standard Cisco labs that were written for the course. You'll get hammered
>for a week on troubleshooting skills--concentrate on fixing things a layer
>at a time, and you'll see some really challenging things that you'll have
>to find and fix. I found it to be a very enjoyable week when I took the
>class last year.
>
>Mark
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>John Huston
>Sent: Monday, May 07, 2001 3:27 PM
>To: ccielab@groupstudy.com
>Subject: RE: Troubleshooting
>
>
>What about Cisco's troubleshooting book? Pretty good information in it.
>Not as good as 10 yrs. experience but a good place to get started. Save
>me a lot of time in frame-relay and ISDN.
>
>http://www.ciscopress.com/book.cfm?series=2&book=18
>ISBN: 1578700922
>
>John Huston
>Systems Engineer
>A+ N+ CCDP, CNE, CCNP, MCSE
>Choice Solutions, LLC
>email: jhuston@choicesolutionsllc.com
>
>
>
> > -----Original Message-----
> > From: Martin, Chris [mailto:chris@pacinter.net]
> > Sent: Monday, May 07, 2001 10:51 AM
> > To: Dean, Justin; ccielab@groupstudy.com
> > Subject: Re: Troubleshooting
> >
> >
> > The only way you will be able to practice for troubleshooting
> > is practice
> > fixing anything that could possibly go wrong with your
> > configuration. The
> > Proctors are not going to create the same bugs everytime. Im sure the
> > troubleshooting section is so random in ways the Proctor
> > finds in causing
> > you havoc that there isnt really a set agenda on how to fix
> > whatever they
> > decide to change on your config. I think the best advice is
> > to make sure you
> > understand the IOS, the protocols and how the operation of
> > your setup works
> > in and out. Troubleshooting something you have never seen
> > before will kill
> > you in the lab, because your time is limited.
> >
> > Best of luck!
> >
> > ----- Original Message -----
> > From: "Dean, Justin" <Justin.Dean@nrtinc.com>
> > To: <ccielab@groupstudy.com>
> > Sent: Monday, May 07, 2001 8:20 AM
> > Subject: Troubleshooting
> >
> >
> > > I am reading all the posts about how brutal the
> > troubleshooting part has
> > > become and thinking.....Hmmm. how does one prepare for this??? Does
> > anyone
> > > have any ideas how to study/prepare for the troubleshooting part.
> > Obviously
> > > the main part is understanding how everything works and
> > works together,
> > but
> > > does anyone have any suggestions on how to practice for
> > this part of the
> > > exam? Thanks,
> > >
> > > Justin M. Dean, CCNP, CCDP
> > > Network Engineer
> > > NRT, Incorporated
> > > (949)367-3438
> > > justin.dean@nrtinc.com
> > > **Please read:http://www.groupstudy.com/list/posting.html
> > **Please read:http://www.groupstudy.com/list/posting.html
>**Please read:http://www.groupstudy.com/list/posting.html
>**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:35 GMT-3