From: Andrew Lennon (andrew.lennon@xxxxxxxxxxxxx)
Date: Sat May 05 2001 - 18:48:45 GMT-3
Lange,
Have you enabled udp services in your config?
service udp-small-servers
Andy
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Lange Gerhard
Sent: 05 May 2001 22:27
To: Ccielab@groupstudy.com
Subject: Router as a TFTP-Server
Hello,
today I tried to test the feature "Autoinstall", but it didn't function.
So I tried to make only a TFTP file copy between two Cisco routers.
One of these router I've configured as TFTP-Server (172.25.10.50/24):
tftp-server slot1:network-confg
And than I've copied the configuration of the TFTP-Server in his local
Flash Memory:
copy run slot1:network-confg
During the attempt to load this configuration from the "TFTP-Server",
I get the following error message (TFTP-Client: 172.25.10.5/24):
r5#copy start tftp
Address or name of remote host []? 172.25.10.50
Destination filename [r5-confg]? network-confg
TFTP: error code 2 received - Access denied
%Error opening tftp://172.25.10.50/network-confg (Undefined error)
r5#
What is going wrong here ?
Ciao,
Gerhard
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:34 GMT-3