From: Curtis Call (curtiscall@xxxxxxxx)
Date: Fri May 04 2001 - 01:06:21 GMT-3
The only way I can think of would be making all the areas you don't want
this route to be present in stub areas. Of course that would also block
all other LSA 5's. Another way would be to make that particular area an
NSSA and filter the route from leaving the area on the ABR.
At 08:57 AM 5/3/01, you wrote:
>Hello All,
>
>I was curious whether anyone was aware of any means to control
>a route within a specific area within OPSF. More specifically,
>if a default-route is configured to a null on an ABR, and originated
>within OPSF, is there a means to control which area will propogate the
>route and which area will not? It seems logical that within an area lsa's
>must be consistent, but if the route were prevented from being inserted
>into an area, then it seems it should work.
>
>A distribute-list on an outbound interface is a no-no. (and really do
>address the issue of keeping the orute out of the undesirable area anyway)
>so what are the alternatives?
>
>Thanks in advance for any advice.
>
>Curtis
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:33 GMT-3