From: Rob Hopkins (rshopkins@xxxxxxxxxxxxx)
Date: Thu May 03 2001 - 19:09:44 GMT-3
I was assuming he was refering to inbound traffic..
----- Original Message -----
From: "Padhu (LFG)" <padhu@steinroe.com>
To: "'Rob Hopkins'" <rshopkins@earthlink.net>; "JAY"
<JInciong@earthlink.net>; <ccielab@groupstudy.com>
Sent: Thursday, May 03, 2001 9:55 AM
Subject: RE: set MEDs on BGP
> 1. Identify nets on AS2WEST ..
> Create ACL to match those nets -Create route map - Set Med out towards
> ebgp neigbor AS1
>
> 2.Identify nets on AS2EAST ..
> Create ACL to match those nets -Create route map - Set Med out towards
> ebgp neigbor AS1
>
> Rob, Can you throw some light how to use AS-Path to accomplish the same
> ...Given that
> AS2WEST & AS2EAST are IBGP peers.. prepending to as-path will effect only
> with EBGP..
>
> Cheers,Padhu
>
>
> -----Original Message-----
> From: Rob Hopkins [mailto:rshopkins@earthlink.net]
> Sent: Thursday, May 03, 2001 2:28 AM
> To: JAY; ccielab@groupstudy.com
> Subject: Re: set MEDs on BGP
>
>
> you may want to modify your AS path for as2west routes (from as2east) and
> vice versa
>
>
> ----- Original Message -----
> From: "JAY" <JInciong@earthlink.net>
> To: <ccielab@groupstudy.com>
> Sent: Thursday, May 03, 2001 3:03 AM
> Subject: set MEDs on BGP
>
>
> > AS1------ebgp-----AS2EAST
> > |
> > ebgp
> > |
> > AS2WEST
> >
> > AS2WEST AND AS2EAST ARE IBGP PEERS.
> >
> >
> > Question:
> >
> > I have networks on AS2WEST. I want routes destined for certain networks
> to
> > take AS2WEST and some to take AS2EAST.
> >
> > After setting MEDs, would I have to create an access list for each
> network?
> >
> > TIA
> >
> > JAY
> > **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:33 GMT-3