From: Martin, Chris (chris@xxxxxxxxxxxx)
Date: Thu May 03 2001 - 15:22:17 GMT-3
Yes you can, you can specify an escape-character under line vty 0 4
for example escape-character 23 is ctrl W
If oyu perform a reverse telnet to a router, then telnet from that router to
another router, and then do a CTRL Shft 6 X you will be returned to the
first router instead of the reverse telnet router from which you telnetted
to. An escape-character will allow you to go back to the router you
established a session from.
regards,
Chris Martin
----- Original Message -----
From: "Mas Kato" <tealp729@home.com>
To: <andrew.2.shore@bt.com>; <ccielab@groupstudy.com>
Sent: Thursday, May 03, 2001 1:00 AM
Subject: RE: telnet -> telnet -> telnet
> Andrew,
>
> I haven't thought this completely through, but I wonder if you can
> re-define the telnet escape sequence on one router or the other (R1 or
> R2)?
>
> Regards,
>
> Mas Kato
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> andrew.2.shore@bt.com
> Sent: Thursday, May 03, 2001 12:46 AM
> To: ccielab@groupstudy.com
> Subject: telnet -> telnet -> telnet
>
>
> Gang
>
> R1 ----> R2 ----> R3
>
> If I have three routers and telnet from R1 to R2 then reverse telnet to
> R3
> is there a way to get back to R2. For security reasons it is not
> possible to
> telnet directly to R2.
>
> CNTR Shift 6 X takes me back to R1 !
>
> I have a real world situation where I need to use R2 (terminal server)
> to do
> config work on 48 new devices and just flicking between them would make
> life
> so much easier.
>
> Thanks,
>
>
> Andrew Shore
> BTcd
> Information Systems Engineering
> Internet & Multimedia
> **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:33 GMT-3