RE: telnet -> telnet -> telnet

From: Devender Singh (devender.singh@xxxxxxxxxxxxxx)
Date: Thu May 03 2001 - 05:16:39 GMT-3

• Next message: Lachlan Kidd: "RE: telnet -> telnet -> telnet"
• Previous message: Erick B.: "Re: telnet -> telnet -> telnet"
• Maybe in reply to: andrew.2.shore@xxxxxx: "telnet -> telnet -> telnet"
• Next in thread: Lachlan Kidd: "RE: telnet -> telnet -> telnet"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Andrew,

press ctl+shift and press 6
1) one time and then x
2) two times and then x
3) four times and then x
ie, 1-> 2 -> 4 -> 8

you will see the diffrence.

Cheers

Devender Singh
BE(Hons), CCNP
IP Solution Specialist

-----Original Message-----
From: andrew.2.shore@bt.com [mailto:andrew.2.shore@bt.com]
Sent: Thursday, 3 May 2001 5:46
To: ccielab@groupstudy.com
Subject: telnet -> telnet -> telnet

Gang

R1 ----> R2 ----> R3

If I have three routers and telnet from R1 to R2 then reverse telnet to R3
is there a way to get back to R2. For security reasons it is not possible to
telnet directly to R2.

CNTR Shift 6 X takes me back to R1 !

I have a real world situation where I need to use R2 (terminal server) to do
config work on 48 new devices and just flicking between them would make life
so much easier.

Thanks,

Andrew Shore
BTcd
Information Systems Engineering
Internet & Multimedia
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html

• Next message: Lachlan Kidd: "RE: telnet -> telnet -> telnet"
• Previous message: Erick B.: "Re: telnet -> telnet -> telnet"
• Maybe in reply to: andrew.2.shore@xxxxxx: "telnet -> telnet -> telnet"
• Next in thread: Lachlan Kidd: "RE: telnet -> telnet -> telnet"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:33 GMT-3