Re: telnet -> telnet -> telnet

From: Roddie Hasan (roddie@xxxxxxxxx)
Date: Thu May 03 2001 - 05:12:52 GMT-3

• Next message: Erick B.: "Re: telnet -> telnet -> telnet"
• Previous message: mcaplan.cs@xxxxxxxxxxxxxxx: "FW: ccbootcamp lab 2"
• Maybe in reply to: andrew.2.shore@xxxxxx: "telnet -> telnet -> telnet"
• Next in thread: Erick B.: "Re: telnet -> telnet -> telnet"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Andrew,

You can get back to R2 with the following sequence:

CTRL-SHIFT-6
CTRL-SHIFT-6
X

The first CTRL-SHIFT-6 gets R1's attention, the second one tells R1 to
send a CTRL-SHIFT-6 down the line to R2, and the X will be read by R2 and
take you to the prompt.

Good luck!

Regards, Roddie

--
<>> Roddie Hasan CCNP, CCDP, SCSA, MCSE -  Sprint E|Solutions
<>> Technology Solutions Consultant - Dallas, Texas
On Thu, 3 May 2001 andrew.2.shore@bt.com wrote:
> Gang
>
> R1 ----> R2 ----> R3
>
> If I have three routers and telnet from R1 to R2 then reverse telnet to R3
> is there a way to get back to R2. For security reasons it is not possible to
> telnet directly to R2.
>
> CNTR Shift 6 X takes me back to R1 !
>
> I have a real world situation where I need to use R2 (terminal server) to do
> config work on 48 new devices and just flicking between them would make life
> so much easier.
>
> Thanks,
>
>
> Andrew Shore
> BTcd
> Information Systems Engineering
> Internet & Multimedia
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html

• Next message: Erick B.: "Re: telnet -> telnet -> telnet"
• Previous message: mcaplan.cs@xxxxxxxxxxxxxxx: "FW: ccbootcamp lab 2"
• Maybe in reply to: andrew.2.shore@xxxxxx: "telnet -> telnet -> telnet"
• Next in thread: Erick B.: "Re: telnet -> telnet -> telnet"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:33 GMT-3