From: Jeff K. (jeffbk@xxxxxxxxxxxxx)
Date: Thu May 03 2001 - 00:10:02 GMT-3
On the lines you are using, did you enter the commands 'modem inout' and
'transport input all.' Remember to match up the settings like in your
hyperterminal (1 stopbit, 8 data bits, etc.). Also, I enter a 'no exec' on
the lines I am using. Hope this helps...
-Jeff
----- Original Message -----
From: "Steve Grewal" <steve.grewal@jatt.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, May 02, 2001 9:53 PM
Subject: Cisco 2511 Terminal Server
> Hello All,
>
> Recently purchased a home lab in efforts to prepare for my CCIE lab,
having some issues configuring my terminal server! I have verified my
config (on my terminal server as well as my remote router) but the message i
get is as follows when i try to connect from my terminal server to the
remote router:
>
> TerminalServer>telnet Router1 2001
> Trying Router1 (172.21.1.1, 2001)... Open
>
> It seems as though the session is being established but I am not getting
any type of display! I would really appreciate if someone could point me to
the right direction for any available papers on this issue or possibly give
me the solution!
>
> Thanks in advance!
>
> Regards,
> Steve Grewal
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:32 GMT-3