From: Justin Menga (Justin.Menga@xxxxxxxxxxxxxxxxxx)
Date: Wed May 02 2001 - 20:17:44 GMT-3
Should just work like a PRI:
isdn switch-type xxxxx
int bri0
no ip address
isdn incoming-voice modem
Regards,
Justin Menga CCIE #6640 CCNP+Voice+ATM CCDP MCSE+I CCSE
WAN Specialist
Computerland New Zealand
PO Box 3631, Auckland
DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
mailto: justin.menga@computerland.co.nz
web: http://www.computerland.co.nz
CAUTION: This e-mail message and accompanying data may contain information
that is confidential and subject to privilege. If you are not the intended
recipient, you are notified that any use, dissemination, distribution or
copying of this message or data is prohibited. If you have received this
e-mail in error, please notify me immediately and delete all material
pertaining to this e-mail. Thank you.
-----Original Message-----
From: Matt.Wilkerson@Level3.com [mailto:Matt.Wilkerson@Level3.com]
Sent: Thursday, 3 May 2001 2:47 a.m.
To: ccielab@groupstudy.com
Subject: BRI off a pbx?
Hi all,
Has anyone here used a BRI line off a pbx for their lab setup? I can get a
few bri lines off the local Avaya Definity (formerly lucent) pbx and was
wondering if anyone knows if this signaling will work perhaps with the 5E
switch-type?
Any input is appreciated!
Thanks,
matt
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:32 GMT-3