Re PPP encapsultation in Serial Line

From: certman (certman@xxxxxxxxx)
Date: Wed May 02 2001 - 07:25:20 GMT-3


   
Hi

You can shut down the serial interface and no shutdown again to enable the inte
rface.

In order to remote the /32 routes you should type:no peer neibor-route at both
interface and then clea ip ro *.

Felix

>Team..
>
>I have some problem with ppp encapsultion on Serial line in my Router..
>When I use HDLC , there was no problem but after I changed encapsultion
>mode to PPP ..I have following problems...
>
>1. sometimes link was down ..so couldn't ping between neighbor routers
>: change encap mode from PPP to HDLC ..it work fine and after I can
>ping.. change again to PPP. Neighbor router can ping each other.
>
>2. There is 32bit mask network like (C 133.2.50.6/32...<<- R6's serial
>ip.) in my R5's Routing Table
>
>(R5)133.2.50.5[s1] -------ppp-----------[s1] 133.2.50.6 (R6)
>
>3. when I configure IPX networking...disconnect problem again...
>
>Do you have any recommand with PPP encapsulation on Serial Line ?
>
>I just use "encapsultion ppp " command in my serial interface.
>
>Thanks in advance.
>
>==================================================
>
>[IMAGE]
>
>==================================================
>?l8. @NEM3], Daum
>Fr;} >24B 9+7a E-mail AV<R Daum GQ8^@O3]
>Av18CL GQ1[ 0K;v<-:q=: Daum FIREBALL
>**Please read:http://www.groupstudy.com/list/posting.html
>unsubscribe cciela

-----------------------------------------
Cb7Q::1$0|#,GaKIQ'S"So
http://www.etang.com/texthanburg/index.htm
K}9XPDDc5DNBE/
http://ad2.263.net/cgi-bin/advert/push/redirect.cgi?aid=2725
EtangJ}WVW(Bt5j
http://www.etang.com/adclient/cncard/index.htm
E.G?HKEzEPJi
http://topic.etang.com/
**Please read:http://www.groupstudy.com/list/posting.html



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:32 GMT-3