From: Mask Of Zorro (ciscokid00@xxxxxxxxxxx)
Date: Tue May 01 2001 - 16:14:19 GMT-3
Yes, I'd like to see that q.921 output...
SPIDS should not be required if the switch-type is indeed basic-5ess
Z
>From: Mas Kato <tealp729@home.com>
>Reply-To: Mas Kato <tealp729@home.com>
>To: "'Roger McNeace'" <rmcneace@lucent.com>, ccielab@groupstudy.com
>Subject: RE: Can't get ISDN to work:UPDATE
>Date: Tue, 01 May 2001 11:59:00 -0700
>
>Roger,
>
>You might want to get the call set up properly before adding on a bunch
>of stuff that comes after that.
>
>A useful debug for call set-up problems is also 'debug isdn q921.'
>
>Is the isdn switch-type correct? A signaling protocol error might be
>indicative of a mismatch...
>
>Are SPIDs required by your provider (or simulator)?
>
>Regards,
>
>Mas Kato
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>Roger McNeace
>Sent: Tuesday, May 01, 2001 10:32 AM
>To: ccielab@groupstudy.com
>Subject: Can't get ISDN to work:UPDATE
>
>
>New config based on suggestions but still same error on "debug isdn
>q931"
>Suspecting ISDN line.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:32 GMT-3