From: Brian Dennis (brian@xxxxxx)
Date: Tue May 01 2001 - 12:45:10 GMT-3
This error from the output of the "debug isdn q931" command isn't referring
a PPP or HDLC error. It's referring to a D-channel error.
Cause i = 0x80EF - Protocol error, unspecified .....
EF "Protocol error, unspecified" An unspecified D-channel error with no
other standard cause.
Brian Dennis
CCIE #2210 (R&S)(ISP/Dial)
CCSI #98640
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Halaska, David
> Sent: Tuesday, May 01, 2001 7:14 AM
> To: 'Roger McNeace'; ccielab@groupstudy.com
> Subject: RE: Cannot get ISDN to work
>
>
> What protocol do you want use for encapsulation. The debug says "Protocol
> error, unspecified"
>
> Try putting in encap ppp on both routers
>
> -----Original Message-----
> From: Roger McNeace [mailto:rmcneace@lucent.com]
> Sent: Tuesday, May 01, 2001 8:49 AM
> To: ccielab@groupstudy.com
> Subject: Cannot get ISDN to work
>
>
> Can anyone tell me what I am doing wrong. I can not get the following ISDN
> lab configs to work. I also included output from show and debug commands.
> Thanks
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:31 GMT-3