PPP encapsultation in Serial Line

From: ÈÄ´Ï (whoamijiny@xxxxxxxxxxx)
Date: Tue May 01 2001 - 21:15:53 GMT-3


   
Team..

I have some problem with ppp encapsultion on Serial line in my Router..
When I use HDLC , there was no problem but after I changed encapsultion
mode to PPP ..I have following problems...

1. sometimes link was down ..so couldn't ping between neighbor routers
: change encap mode from PPP to HDLC ..it work fine and after I can
ping.. change again to PPP. Neighbor router can ping each other.

2. There is 32bit mask network like (C 133.2.50.6/32...<<- R6's serial
ip.) in my R5's Routing Table

(R5)133.2.50.5[s1] -------ppp-----------[s1] 133.2.50.6 (R6)

3. when I configure IPX networking...disconnect problem again...

Do you have any recommand with PPP encapsulation on Serial Line ?

I just use "encapsultion ppp " command in my serial interface.

Thanks in advance.

==================================================

[IMAGE]

==================================================
?l8. @NEM3], Daum
Fr;} >24B 9+7a E-mail AV<R Daum GQ8^@O3]
Av18CL GQ1[ 0K;v<-:q=: Daum FIREBALL
**Please read:http://www.groupstudy.com/list/posting.html



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:31 GMT-3