From: Mas Kato (tealp729@xxxxxxxx)
Date: Mon Apr 30 2001 - 21:22:31 GMT-3
Niall,
By default, physical NBMA interfaces are considered 'non-broadcast' by
OSPF, so unless you change the way OSPF treats the interface ('ip ospf
network') or change the way the interface appears to OSPF
(point-to-point sub-interface), you'll have to manually configure
neighbor statements, as you've found.
By the way, you really meant 'network 192.168.1.2...' under your OSPF
process, didn't you?
Regards,
Mas Kato
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Niall El-Assaad
Sent: Monday, April 30, 2001 4:39 PM
To: ccielab@groupstudy.com
Subject: OSPF: Do frame relay main interfaces need neighbor statements
(default)
Hi,
If I configure frame-relay interfaces like
int s0
encapsulation frame-relay
frame-relay map ip 192.168.1.1 100 broadcast
ip address 192.168.1.2 255.255.255.0
router ospf 1
network 192.168.1.1 0.0.0.0 area 0
Then adjacencies do not form. I can see the hello packets going accross
the
link (deb ip pack).
If I add neighbor statements it works fine.
Are neighbor statements needed? From Doyle it says they are only needed
pre
10.0. (page 558).
I know about using point-to-multipoint. But just want to know if
neighbors
are essential on all versions of software.
cheers,
niall
=======================================================
Niall El-Assaad, Systems Engineer
EMEA-UK Retail Finance North
C i s c o S y s t e m s Mobile: +44 (0)772 088 4650
VMail: +44 (0)208 734 4206
| | Fax: +44 (0)161 864 4508
| |
||| |||
.:|||||:..:|||||:. E-mail: nelassaa@cisco.com
------------------ Web : http://www.cisco.com
Crescent House, Towers Business Park, Wilmslow Road,
Didsbury, Manchester M20 2JE, United Kingdom
========================================================
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:03 GMT-3