From: Johnny Dedon (johnny.dedon@xxxxxxxxxx)
Date: Mon Apr 30 2001 - 21:08:39 GMT-3
Niall,
You don't need neighbor statements in this config.
You have the wrong address in the ospf network command. You use 192.168.1.1
when it should be 192.168.1.2.
Johnny Dedon
Senior Staff Consultant
Exodus Professional Services
johnny.dedon@exodus.net
www.exodus.net
----- Original Message -----
From: "Niall El-Assaad" <nelassaa@cisco.com>
To: <ccielab@groupstudy.com>
Sent: Monday, April 30, 2001 6:39 PM
Subject: OSPF: Do frame relay main interfaces need neighbor statements
(default)
> Hi,
>
> If I configure frame-relay interfaces like
>
> int s0
> encapsulation frame-relay
> frame-relay map ip 192.168.1.1 100 broadcast
> ip address 192.168.1.2 255.255.255.0
>
> router ospf 1
> network 192.168.1.1 0.0.0.0 area 0
>
> Then adjacencies do not form. I can see the hello packets going accross
the
> link (deb ip pack).
>
> If I add neighbor statements it works fine.
>
> Are neighbor statements needed? From Doyle it says they are only needed
pre
> 10.0. (page 558).
>
> I know about using point-to-multipoint. But just want to know if neighbors
> are essential on all versions of software.
>
> cheers,
>
> niall
>
>
> =======================================================
> Niall El-Assaad, Systems Engineer
> EMEA-UK Retail Finance North
>
> C i s c o S y s t e m s Mobile: +44 (0)772 088 4650
> VMail: +44 (0)208 734 4206
> | | Fax: +44 (0)161 864 4508
> | |
> ||| |||
> .:|||||:..:|||||:. E-mail: nelassaa@cisco.com
> ------------------ Web : http://www.cisco.com
>
> Crescent House, Towers Business Park, Wilmslow Road,
> Didsbury, Manchester M20 2JE, United Kingdom
> ========================================================
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:03 GMT-3