From: gb@xxxxxxxxxx
Date: Mon Apr 30 2001 - 15:47:32 GMT-3
BootP will usually use broadcast messages that are blocked by default. ip
helper is used to convert these broadcasts to unicast.
----- Original Message -----
From: "DuBell, Robert ITC J633CT1" <dubell@jfcom.mil>
To: "'Tarun Pahuja'" <tpahuja@hotmail.com>; <ccielab@groupstudy.com>
Sent: Monday, April 30, 2001 2:15 PM
Subject: BLOCKING BOOTP ON AN INDIVIDUAL INTERFACE
> Real life situation here. If I apply the following access list on a
> interface, will it block bootp from being distrubuted throughout the
> network. Or is there a better way to block bootp from specific interfaces
> ??/...Thanks
>
> access-list 101 deny udp any any eq 67
> access-list 101 deny udp any any eq 68
> access-list 101 permit any
>
>
>
> ITC(SW) Robert L. DuBEll
> Chief Network Engineer
> dubell@jfcom.mil
> commercial 757-836-6129
> DSN - 836-6129
>
> -
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:02 GMT-3