From: Masood Malik (malikm24@xxxxxxxxxxx)
Date: Sat Apr 28 2001 - 18:47:44 GMT-3
Moran,
Add ppp authentication chap to the BRI 0 interface on R4.
If you are using authentication you will have to specify this on both dialer
interface and BRI interface.
I hope you have the correct the following command in global config.
dialer-list 1 protocol ip permit.
regards
Masood
----- Original Message -----
From: "Moran, Ed" <morane@telecomsys.com>
To: <bernard.moreon@socgen.co.uk>
Cc: <ccielab@groupstudy.com>
Sent: Sunday, April 29, 2001 3:52 AM
Subject: RE: ISDN Connection Problem
> Here are the relevant configs from both routers. I am getting the TEI and
> the SPIDS are valid, the call just won't go through.
>
> hostname R3
> !
> enable password cisco
> !
> username R4 password 0 cisco
> ip subnet-zero
> no ip domain-lookup
> ipx routing 0003.0003.0003
> ipx internal-network 3
> isdn switch-type basic-ni
> !
> interface BRI0
> ip address 139.5.12.13 255.255.255.252
> no ip directed-broadcast
> encapsulation ppp
> dialer map ip 139.5.12.14 name R4 broadcast 8358662
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 0835866101
> isdn spid2 0835866301
> ppp authentication chap
>
> --------------------------------------------------------------------------
> hostname R4
> !
> enable password cisco
> !
> username R3 password 0 cisco
> ip subnet-zero
> no ip domain-lookup
> ipx routing 0004.0004.0004
> ipx internal-network 4
> isdn switch-type basic-ni
> !
> interface BRI0
> no ip address
> no ip directed-broadcast
> encapsulation ppp
> dialer pool-member 1
> isdn switch-type basic-ni
> isdn spid1 0835866201
> isdn spid2 0835866401
> !
> interface Dialer0
> ip address 139.5.12.14 255.255.255.252
> no ip directed-broadcast
> encapsulation ppp
> dialer remote-name R3
> dialer string 8358661
> dialer pool 1
> dialer-group 1
> ppp authentication chap
>
> -----Original Message-----
> From: bernard.moreon@socgen.co.uk
> To: Moran, Ed
> Cc: 'ccielab@groupstudy.com'
> Sent: 4/28/01 1:29 PM
> Subject: Re: ISDN Connection Problem
>
>
>
> Could you post the config?
> I'm suspecting a dialer profile configuration witt a missing dialer pool
> command
> under the dialer interface or bri interface.
>
> Bernard
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:00 GMT-3