From: Moran, Ed (morane@xxxxxxxxxxxxxx)
Date: Sat Apr 28 2001 - 15:21:50 GMT-3
The dialer-list is there, I just forgot to put it in the post. So I have to
have "ppp auth chap" on the BRI even though I'm using Dialer Profiles on R4?
I do have it in the Dialer0 interface.
-----Original Message-----
From: Erick B.
To: Moran, Ed; 'bernard.moreon@socgen.co.uk '
Cc: ''ccielab@groupstudy.com' '
Sent: 4/28/01 2:04 PM
Subject: RE: ISDN Connection Problem
You're missing a dialer-list globally (I don't see it
below), and R4 doesn't have ppp auth chap on BRI
interface.
If you can capture 'debug isdn q931', 'debug ppp nego'
that would be helpful.
Erick
--- "Moran, Ed" <morane@telecomsys.com> wrote:
> Here are the relevant configs from both routers. I
> am getting the TEI and
> the SPIDS are valid, the call just won't go through.
>
> hostname R3
> !
> enable password cisco
> !
> username R4 password 0 cisco
> ip subnet-zero
> no ip domain-lookup
> ipx routing 0003.0003.0003
> ipx internal-network 3
> isdn switch-type basic-ni
> !
> interface BRI0
> ip address 139.5.12.13 255.255.255.252
> no ip directed-broadcast
> encapsulation ppp
> dialer map ip 139.5.12.14 name R4 broadcast 8358662
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 0835866101
> isdn spid2 0835866301
> ppp authentication chap
>
>
------------------------------------------------------------------------
-- > hostname R4 > ! > enable password cisco > ! > username R3 password 0 cisco > ip subnet-zero > no ip domain-lookup > ipx routing 0004.0004.0004 > ipx internal-network 4 > isdn switch-type basic-ni > ! > interface BRI0 > no ip address > no ip directed-broadcast > encapsulation ppp > dialer pool-member 1 > isdn switch-type basic-ni > isdn spid1 0835866201 > isdn spid2 0835866401 > ! > interface Dialer0 > ip address 139.5.12.14 255.255.255.252 > no ip directed-broadcast > encapsulation ppp > dialer remote-name R3 > dialer string 8358661 > dialer pool 1 > dialer-group 1 > ppp authentication chap > > -----Original Message----- > From: bernard.moreon@socgen.co.uk > To: Moran, Ed > Cc: 'ccielab@groupstudy.com' > Sent: 4/28/01 1:29 PM > Subject: Re: ISDN Connection Problem > > > > Could you post the config? > I'm suspecting a dialer profile configuration witt a > missing dialer pool > command > under the dialer interface or bri interface. > > Bernard >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:00 GMT-3