From: Justin Menga (Justin.Menga@xxxxxxxxxxxxxxxxxx)
Date: Thu Apr 26 2001 - 17:16:11 GMT-3
Ideally you want two ATM edge devices - but you can use the 'CPU' port on
the LS1010 (port 2/0/0) as an edge device - this is a logical port and you
can configure it as you would a normal ATM edge device.
Regards,
Justin Menga CCIE #6640 CCNP+Voice CCDP MCSE+I CCSE
WAN Specialist
Computerland New Zealand
PO Box 3631, Auckland
DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
mailto: justin.menga@computerland.co.nz
web: http://www.computerland.co.nz
CAUTION: This e-mail message and accompanying data may contain information
that is confidential and subject to privilege. If you are not the intended
recipient, you are notified that any use, dissemination, distribution or
copying of this message or data is prohibited. If you have received this
e-mail in error, please notify me immediately and delete all material
pertaining to this e-mail. Thank you.
-----Original Message-----
From: Dhanz Sakx [mailto:dhanz@oceanfree.net]
Sent: Thursday, 26 April 2001 6:54 p.m.
To: ccielab@groupstudy.com
Subject: ATM-Cat5500 with ls1010
Hi Guys
I have Cat5500 switch with ls1010 card and a 3600 with atm interface, How i
can simulate ATM PVC or SVC lab .. Can sombody help me please ?
Thanks
Dhanz
Visit http://www.oceanfree.net to get your free e-mail account and use our
unique Irish Internet directory
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:58 GMT-3