Re: Cat5k and octpus cable

From: Jason1 (jason1@xxxxxxxxxx)
Date: Thu Apr 26 2001 - 05:39:48 GMT-3

Next message: mcaplan.cs@xxxxxxxxxxxxxxx: "OSPF NSSA default routes - again"
Previous message: Bernard Omrani: "RE: Telnet to home lab from my company with a firewall"
Maybe in reply to: Mike Hennigan: "Cat5k and octpus cable"
Next in thread: Kevin Mahler: "RE: Cat5k and octpus cable"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Yah, swap the pins on the RJ45 to DB25 adapter.. Or if you got the original
adapter from Cisco , it should work fine....

----- Original Message -----
From: "Mike Hennigan" <Mikeh@wnycs.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, April 26, 2001 11:52 AM
Subject: Cat5k and octpus cable

> is there anyway to make the cat 5k w/a sup III use the console cable from
an octupus calbe connected to a 2511?
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html

Next message: mcaplan.cs@xxxxxxxxxxxxxxx: "OSPF NSSA default routes - again"
Previous message: Bernard Omrani: "RE: Telnet to home lab from my company with a firewall"
Maybe in reply to: Mike Hennigan: "Cat5k and octpus cable"
Next in thread: Kevin Mahler: "RE: Cat5k and octpus cable"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:56 GMT-3