From: Johnny Dedon (johnny.dedon@xxxxxxxxxx)
Date: Wed Apr 25 2001 - 18:28:10 GMT-3
John,
Pete has a pretty good list of what you might want to use for what I call
house keeping. Be very careful of just automatically applying statements
without reading the requirements. This could bite you if the requirements
ask you to do something different that you are doing with your "defaults"
and you read right through it.
Johnny Dedon
Senior Staff Consultant
Exodus Professional Services
johnny.dedon@exodus.net
www.exodus.net
----- Original Message -----
From: "John W. Redmond" <c-john.redmond@wcom.com>
To: "ccielab @ groupstudy.com" <ccielab@groupstudy.com>
Sent: Wednesday, April 25, 2001 3:33 PM
Subject: The Initial Configuration
> Greetings Everyone,
>
> I was wondering, what are the 1st few configuration steps you would
> recommend to do on a CCIE LAB router before any specific configuration
takes
> place. For example, before I do any specific/high level router
> configurations, I configure the following...
>
> 1 - "HOSTNAME"
> 2 - "NO IP DOMAIN-LOOKUP"
> 3 - "ENABLE SECRET <password>"
>
> I was thinking about apply a password on my VTY interface, but then I
> realized "what if I need to configure a dynamic access-list" then I would
> have to reconfigure my VTY interfaces and create a local database...
>
> Any of you have any suggestions?
>
>
> John
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:56 GMT-3