From: daneyon hansen (daneyonhansen@xxxxxxxxxxx)
Date: Wed Apr 25 2001 - 01:03:16 GMT-3
If you do a "dialer map callback class nonname broad DR#" on R2, then the
router should only call R1 when their is a call back request from that
router.
>From: "max aronica" >Reply-To: "max aronica" >To: ccielab@groupstudy.com
>Subject: ppp callback - username dial string >Date: Tue, 24 Apr 2001
22:11:00 -0000 > >Just 3 minutes of your time. >Suppose R1 should call
R2, and R2 should drop and call-back R1 (only >if >called). > >R2 should
never call R1 on its own initiative, so I don't want to >set a >dialer
string on R2 async or bri port. > >How can I have R2 use , when calling
back, the dial string defined >in : > >username R1 callback-dialstring
123456 password cisco
>----------------------------------------------------- > >without setting
the dialer string on the port ? > >This should not trigger the call for
traffic or routing protocols, >but only >for callback return call, so it
would be the one to use! > >Is the only way to make callback working the
canonical one (dialer >map >ip name R1 class dial1 broadcast 123456
etc...) ? > >Thanks for your response >Max > > > > > > > >Can you help
.... >Thanks Max > > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:55 GMT-3