From: Chuck Larrieu (chuck@xxxxxxxxxxxxx)
Date: Tue Apr 24 2001 - 21:15:53 GMT-3
Suggestion? Yes. Read through your lab first, then see if your idea meets
the requirements of the lab.
The topic of RID's is one I discussed with the folks who ran the ASET lab
when it still existed ) and with the folks in the Mentor ECP1 class. As a
result of these discussions, I developed an alternative RID scheme for my
visit to the lab.
But - the lab document is your holy book. There may be directives that
preclude your doing what you suggest. There may just be no need. Or it may
be perfectly acceptable. Only your proctor knows for sure ;->
HTH
Chuck
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
bernard.moreon@socgen.co.uk
Sent: Tuesday, April 24, 2001 1:42 PM
To: ccielab@groupstudy.com
Subject: Ospf router-id command
Hi,
I was wondering if the proctor will appreciate if I put a router-id command
under every OSPF process to set the router id to something very simple like:
R1
=> router-id 1.1.1.1 and so on?
Any suggestion for those who already went to the Lab?
BM
****************************************************************************
****************
This email and any attachments are confidential. They may contain privileged
information and are intended for the named addressee (s) only. They must not
be distributed without our consent. If you are not the intended recipient,
please
notify us immediately and do not disclose, distribute, or retain this email
or any
part of it. Unless expressly stated, opinions in this email are those of the
individual sender, and not of Societe Generale. We believe but do not
warrant
that this e-mail and any attachments are virus free. You must therefore take
full
responsibility for virus checking. Societe Generale and its subsidiaries
reserve
the right to monitor all email communications through their networks
****************************************************************************
*****************
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:55 GMT-3