RE: FR MAP LOCAL LAYER 3 ADDRESS

From: alan (abasinge@xxxxxxxxxx)
Date: Tue May 29 2001 - 12:53:01 GMT-3

• Next message: Rob Webber: "RE: OT - accessing home lab via the internet"
• Previous message: Curtis Call: "RE: Re: summary-address in ospf and redistribution"
• Maybe in reply to: Ken Yeo: "FR MAP LOCAL LAYER 3 ADDRESS"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
I would read the requirements very carefully and only implement what is
required. If they say you need to be able to ping the local frame interface
then map the dlci. If they do not then don't. If in doubt ask the proctor.

Alan Basinger CCIE #7145
SBC DataComm
Houston Texas

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Mas Kato
Sent: Tuesday, April 24, 2001 3:33 AM
To: 'Ken Yeo'; ccielab@groupstudy.com
Subject: RE: FR MAP LOCAL LAYER 3 ADDRESS

...and maybe others in a non-full mesh too...

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Ken Yeo
Sent: Tuesday, April 24, 2001 12:40 AM
To: ccielab@groupstudy.com
Subject: FR MAP LOCAL LAYER 3 ADDRESS

Most labs require "ping anywhere to everywhere". Does that means we need
to
map DLCI to local IP address too?

For example:

interface serial 0
encap frame-relay
ip address 1.1.1.1 255.255.255.0
frame-relay map ip 1.1.1.1 105 broadcast
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html

• Next message: Rob Webber: "RE: OT - accessing home lab via the internet"
• Previous message: Curtis Call: "RE: Re: summary-address in ospf and redistribution"
• Maybe in reply to: Ken Yeo: "FR MAP LOCAL LAYER 3 ADDRESS"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:54 GMT-3