From: Masood Malik (malikm24@xxxxxxxxxxx)
Date: Mon Apr 23 2001 - 19:20:39 GMT-3
set no-advertise community for 1.1.1.1 on R2
regards
Masood
----- Original Message -----
From: "Vladimir Shchutski" <vshchutski@yahoo.com>
To: "Dean, Justin" <Justin.Dean@nrtinc.com>; <ccielab@groupstudy.com>
Sent: Tuesday, April 24, 2001 7:42 AM
Subject: Re: BGP filtering without IP address Filters
> try community names.
>
> Regards,
> Vladimir.
>
> --- "Dean, Justin" <Justin.Dean@nrtinc.com> wrote:
> > I am trying to have R2 filter the 1.1.1.1 from being
> > advertised to R3. The
> > requirement is that you cannot filter by ip address.
> > I thought I could tag
> > it with a route-map at R1 then match tag at R2 and
> > dump it, but I get an
> > error trying to put the set tag in the route-map and
> > apply it to the
> > neighbor outbound. I also tried to prepend as's, but
> > since R1 and R2 are in
> > same as the route shows as "i". Any Ideas? justin
> >
> >
> > 1.1.1.1-------R1----IBGP---R2---EBGP---R3----
> > **Please
> > read:http://www.groupstudy.com/list/posting.html
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:54 GMT-3