From: Andrew White (AWHITE@xxxxxxxxxxx)
Date: Mon Apr 23 2001 - 16:56:40 GMT-3
It depends on the module, take it out, on the side on the PCB it will /
should be marked and will tell you if it is SM or MM. If it does not tell
you, get the id code of the card and search for it on CCO. Remember SM uses
Laser, so what ever you do, DON'T look into it. Also, if you are putting SM
back to back at a very short distance make sure you use an attenuator.
cheers
Andrew
-----Original Message-----
From: Tariq Sharif [mailto:tariq_sharif@btinternet.com]
Sent: 23 April 2001 15:35
To: Ccielab@Groupstudy. Com
Subject: Cisco 7000 ATM Module
Hi all
Got a ATM module for a Cisco7000. Not sure if it is multimode or single
mode. How do I find this out?
Many thanks & regards.
Tariq Sharif
[GroupStudy.com removed an attachment of type application/ms-tnef which had
a name of winmail.dat]
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:54 GMT-3