From: Kurt Bergsbaken (kbergsbaken@xxxxxxxxxx)
Date: Sat Apr 21 2001 - 12:36:54 GMT-3
This change is done on all the Windows boxes involved, or is this a router conf
ig.
Please elucidate on the definition of an MS port.
Thanks
-----Original Message-----
From: Chuck Church [SMTP:cchurch@optonline.net]
Sent: Friday, April 20, 2001 7:34 PM
To: ccielab@groupstudy.com
Subject: RE: [Network Neighborhood - Multiple Subnets - Workgroup only -
N o Domain.]
To get Network Neighborhood to work over subnets, you need to add a ip
forward protocol for one of the MS ports. By default, only 2 of the 3 are
handled by IP helper. I can't remember which one is not included off the
top of my head. Try adding UDP 137, 138, and 139, and see which one is
added to the config. This should do it.
Chuck
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:53 GMT-3