From: Vinay Nichani (vnichani@xxxxxxxxx)
Date: Fri Apr 20 2001 - 17:44:46 GMT-3
I typed out the relevant stuff, couldn't copy the whole config cause it's on
another computer that isn't connected, main thing is that rip is running on
int e0, ospf on s0.202 and bri0 as backup, (backup int specified on the
other side). redistributing the connected rip route into ospf screwed up the
metric big time, other rip routes were fine, i fixed the problem with a
summary-address statement in ospf, but still don't get what the problem was.
router rip
version 2
network 170.100.42.241
passive-int bri0
passive-int s0
redistribute ospf 100 metric 2
distribute-list 1 out ospf 100
access-list 1 deny 170.100.42.241 0.0.0.15
access-list 1 permit any
router ospf 100
network 170.100.202.0 0.0.0.255 area 0
network 170.100.30.0 0.0.0.15 area 0
redist rip metric 30 subnets
distribute-list 12 out rip
access-list 12 permit 170.100.42.0 0.0.0.255
int e0
ip add 170.100.42.241 255.255.255.240
no shut
int s0.202 m
ip ospf network point-to-multi
ip add 170.100.202.1 255.255.255.0
no shut
encap frame
no frame inverse
frame map...
int bri0
ip ospf demand-circuit
ip add 170.100.30.1 255.255.255.0
no shut
isdn...
-----Original Message-----
From: Elias Aggelidis [mailto:eaggel@algo.com.gr]
Sent: Friday, April 20, 2001 1:13 PM
To: Vinay Nichani; ccielab@groupstudy.com
Subject: RE: RIPv2 - OSPF redist.
Can you post you configs?
Regards
****************************************************************
Elias Aggelidis ALGOSYSTEMS SA
Senior Network Engineer 4, Sardeon Str
CCNA, CCNP Nea Smyrni
CVOICE, Security Specialised
PICA Administrator
Athens 17121
tel: +301-9310281 GREECE
fax: +301-9352873
email: eaggel@algo.com.gr
****************************************************************
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of Vinay
Nichani
Sent: Paqasjeu^, 20 Apqik_ou 2001 4:05 pl
To: ccielab@groupstudy.com
Subject: RIPv2 - OSPF redist.
Hi
I am redistributing RIPv2 routes int OSPF with the command "redistribute rip
metric 30 subnets", with a distribute-list filtering selected routes out.
That distribute-list is doing it's job correctly, but the connected RIP
route that gets through shows up on a "show ip ospf database external" with
a metric of 16777215, as well as a TOS of 127. All other external routes
have TOS of 0 and metric of 40 (they are coming from other routers). As a
result my RIPv2 route does not show up in other OSPF routers' routing tables
(it is unreachable). If I take the distribute-list off, the other routes go
through fine, TOS = 0, metric = 30. But that connected route still has TOS =
127, and metric = 16777215. I have no idea why, does anyone else?
Thanks
Vinay
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:53 GMT-3