From: Elias Aggelidis (eaggel@xxxxxxxxxxx)
Date: Fri Apr 20 2001 - 17:09:37 GMT-3
I think I am better !!!
I have some AGS on my warehouse and a lot of c4000 with 30pin memory which
are running 9.0.1 !!!!!
But in the lab the switches are using 5.4 and the routers 11.3T at least.
So make an upgrade.
Regards
Elias
****************************************************************
Elias Aggelidis ALGOSYSTEMS SA
Senior Network Engineer 4, Sardeon Str
CCNA, CCNP Nea Smyrni
CVOICE, Security Specialised
PICA Administrator
Athens 17121
tel: +301-9310281 GREECE
fax: +301-9352873
email: eaggel@algo.com.gr
****************************************************************
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Martin, Chris
Sent: ?a?as?e??, 20 ?p?????? 2001 7:57 55
To: Tariq Sharif; Michel GASPARD
Cc: Foster, Kristopher; Ccielab@Groupstudy. Com
Subject: Re: STP on Cat 5Ks
Wow ios2.4? Did you find this switch in a museum? Guess is shouldnt make
fun, we have some routers still on 10.3.
In my experience when upgrading to newer ios i have seen some commands go
away and new ones added to replace the function of the old commands. In a
switch IOS you will see differences related to port configuratioin, spanning
tree, and protocol filtering. I dont believe protocol filtering is even a
option in 2.4
If you upgraded your switches memory to handle a more current IOS then im
sure you would see differences. Another possibly maybe to get a Flash card
and store the IOS on it. Cant get something for nothing though.
Good luck
Chris Martin
Portland Public Schools
CCNP+security+voice CCDP MCSE
----- Original Message -----
From: "Tariq Sharif" <tariq_sharif@btinternet.com>
To: "Michel GASPARD" <mgaspard@cisco.com>; "Martin, Chris"
<chris@pacinter.net>
Cc: "Foster, Kristopher" <KFoster@C1Communications.com>;
"Ccielab@Groupstudy. Com" <ccielab@groupstudy.com>
Sent: Friday, April 20, 2001 9:52 AM
Subject: RE: STP on Cat 5Ks
> On of the switches has IOS 2.4 & limited RAM. Can someone tell me if the
> commands will be COMPLETLY different than newer versions?
>
> Many thanks & regards.
>
> Tariq Sharif
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Michel GASPARD
> Sent: 20 April 2001 16:18
> To: Martin, Chris
> Cc: Tariq Sharif; Foster, Kristopher; Ccielab@Groupstudy. Com
> Subject: Re: STP on Cat 5Ks
>
>
> All,
>
> And beware that 6.x requires 64M of RAM, 5.x requires 32 M, and 4.x
> requires 16 M of RAM. So check the RAM first ;-)) (and upgrade it is
> necessary/possible)
>
>
> Latest 4.x (4.5.11) is pretty stable (trust a TAC guy working in LAN
> technologies..)
>
> Regards,
>
> Michel
>
>
> "Martin, Chris" wrote:
> >
> > You should be on at least V5.4a to avoid allot of bugs I believe the
> newest
> > is 6.1a. Check the CCO for caveats with each version..
> >
> > ----- Original Message -----
> > From: "Tariq Sharif" <tariq_sharif@btinternet.com>
> > To: "Foster, Kristopher" <KFoster@C1Communications.com>;
> > "Ccielab@Groupstudy. Com" <ccielab@groupstudy.com>
> > Sent: Friday, April 20, 2001 7:31 AM
> > Subject: RE: STP on Cat 5Ks
> >
> > > What IOS versions should I practice with. I think the switches have
4.x.
> > > Have there been any changes with different versions? I don't know Cat
> IOS?
> > >
> > > Many thanks & regards.
> > >
> > > Tariq Sharif
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > > Foster, Kristopher
> > > Sent: 20 April 2001 14:57
> > > To: 'Tariq Sharif'; Ccielab@Groupstudy. Com
> > > Subject: RE: STP on Cat 5Ks
> > >
> > >
> > > There shouldn't be any problem with this. In a number of situations
two
> > > switches are connected via two trunk ports for physical redundancy
(STP
> > > being used to block one of the ports).
> > >
> > > Kris,
> > >
> > > -----Original Message-----
> > > From: Tariq Sharif [mailto:tariq_sharif@btinternet.com]
> > > Sent: April 20, 2001 9:40 AM
> > > To: Ccielab@Groupstudy. Com
> > > Subject: STP on Cat 5Ks
> > >
> > >
> > > Hi all,
> > >
> > > I wanted to practice STP & trunking on Cat5ks. At the moment I get my
> > hands
> > > on 2 (5002). Could you tell me if it is possible to do STP & trunks by
> > > having 2 connections between the 2 switches? I know ideally I need 3
to
> > get
> > > STP going but may be I can get some practice with 2?
> > >
> > > Many thanks & regards.
> > >
> > > Tariq Sharif
> > >
> > > [GroupStudy.com removed an attachment of type application/ms-tnef
which
> > had
> > > a name of winmail.dat]
> > > **Please read:http://www.groupstudy.com/list/posting.html
> > > **Please read:http://www.groupstudy.com/list/posting.html
> > > **Please read:http://www.groupstudy.com/list/posting.html
> > **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:53 GMT-3