From: Mask Of Zorro (ciscokid00@xxxxxxxxxxx)
Date: Fri Apr 20 2001 - 13:30:29 GMT-3
The "Demonstrator" is the model name for one of Teltone's ISDN simulators.
It only supports the basic-ni switch type. The Teltone "ILS-2000", which is
the next step up, allows you to configure additional switch types.
Z
>From: "Price, Jamie" <JPrice@isgteam.com>
>Reply-To: "Price, Jamie" <JPrice@isgteam.com>
>To: "'chris@pacinter.net'" <chris@pacinter.net>, "Hale, Wendy"
><WRHale@NECBNS.com>, ccielab@groupstudy.com
>Subject: RE: Problems with Teltone/2500's
>Date: Thu, 19 Apr 2001 16:02:47 -0500
>
>As far as I know - I'm sure someone will correct me if I'm wrong :) - the
>demonstrator ONLY supports 1 switch type - NI1. The Teltone "Simulator"
>supports multiple switch types.
>
>Jamie
>
>-----Original Message-----
>From: chris@pacinter.net [mailto:chris@pacinter.net]
>Sent: Thursday, April 19, 2001 3:15 PM
>To: Hale, Wendy; ccielab@groupstudy.com
>Subject: Re: Problems with Teltone/2500's
>
>
>Wendy:
> Usually the ISDN switch type is Basic-NI or 5ess. Depending
>on
>your telco. I know Sprint / Att usually use basic-ni
>
>The config parameters on your Teltone should be B8ZS.for signalling.not
>sure
>about yor other config options Define your default route to be on the
>interface and not the network, that way the interface will dial out
>immediately. Although it sounds like your delay is caused from the network
>and not the DTE device..
>
>Hope this helps!
>
>Chris Martin
>
>
>
>
>----- Original Message -----
>From: "Hale, Wendy" <WRHale@NECBNS.com>
>To: <ccielab@groupstudy.com>
>Sent: Thursday, April 19, 2001 12:52 PM
>Subject: Problems with Teltone/2500's
>
>
> > I have a Teltone Demonstrator connected to a 2503 and 2520 via Adtran
>ACE1
> > NT's. I get multiple-frame-established and valid spid's. When I enable
> > debug isdn q921/q931 and generate interesting traffic, I get an error
> > message saying that there was a delayed response from the called number.
> > This happens dialing from either router. IOS 12.1(9)
> >
> > 1. Have anyone seen this problem before?
> >
> > 2. Does anyone know what config parameters I should use on the Teltone
>and
> > which isdn switch type on the routers?
> >
> > Thanks!
> >
> > Wendy Hale
> > NEC/BNS
> > 818-599-7698 mobile
> > 877-445-8834 pager
> > 818-672-2438 office
> > WRHale@necbns.com
> > **Please read:http://www.groupstudy.com/list/posting.html
>**Please read:http://www.groupstudy.com/list/posting.html
>**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:52 GMT-3