From: Arthayuth.B@xxxxxxxxxxxxxxxxxx
Date: Fri Apr 20 2001 - 00:59:23 GMT-3
for CHAP you need to use same password only pap that support difference
password.
Arthayuth
CIP,CCNP,CCDP
-----Original Message-----
From: Rob Hopkins [mailto:rshopkins@earthlink.net]
Sent: Friday, April 20, 2001 1:47 PM
To: ccielab@groupstudy.com
Subject: PPP CHAP Question
I must be missing something here,
See the config below, which works, my question is why does it work? Notice
R1 doesnt even have the
password "bheadpass" anywhere, in fact if I change bhead pass on R1 to
bheadpass it doesnt work.
When I debug ppp authentication it (from R2)
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to
down
%LINK-3-UPDOWN: Interface Serial0, changed state to down
%LINK-3-UPDOWN: Interface Serial0, changed state to up
Se0 PPP: Treating connection as a dedicated line
Se0 PPP: Phase is AUTHENTICATING, by both
Se0 CHAP: Using alternate hostname bhead
Se0 CHAP: O CHALLENGE id 26 len 26 from "bhead"
Se0 CHAP: I CHALLENGE id 28 len 27 from "beavis"
Se0 CHAP: Using alternate hostname bhead
Se0 CHAP: O RESPONSE id 28 len 26 from "bhead"
Se0 CHAP: I RESPONSE id 26 len 27 from "beavis"
Se0 CHAP: O SUCCESS id 26 len 4
Se0 CHAP: I SUCCESS id 28 len 4
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to up
R1
username bhead password 0 beavispass
interface Serial0
ip address 10.1.1.1 255.255.255.252
encapsulation ppp
ppp authentication chap
ppp chap hostname beavis
ppp chap password 7 15100E0D12233834292026 (beavispass)
!
R2
username beavis password 0 beavispass
interface Serial0
ip address 10.1.1.2 255.255.255.252
encapsulation ppp
no fair-queue
clockrate 1000000
ppp authentication chap
ppp chap hostname bhead
ppp chap password 7 13071F170A08142B3837 (bheadpass)
!
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:52 GMT-3